Request Quotation & Assistance Name* First Name Last Name Company* Address Email* Telephone* Fax Project Description Describe your project or cable application If you have a current drawing of the assembly you want to make, upload your documents here You can attach up to three files here with a total of 10 Mb for uploading. If your files weight in total more than 10MB please send them through an e-mail to sales@mctcable.com Cable Selection Quantity Needed Specify length and number Cable Diameter Specify in inches or millimeters Is this cable to be used in a pulley application? NoYes Cable Construction ---1 x 71 x 197 x 77 x 19Other If you chose "Other" specify in this text area. Does the cable require a nylon or vinyl coating? No Coating RequiredNylonVinyl Coating Diameter Specify in inches or millimeters What is the load required? Type and Load ---Working LoadShock LoadStatic Load Specify pounds. Is there a safety factor required? ---NoYesUnsure Specify ratio if known. Is Proofloading or Prestretching required? Proofloading Prestretching Engineering Criteria Environmental Conditions Any conditions such as high heat, salt water environment, corrosives usage, should be specified here. Special Materials or Military Specification Requirements You can read about Military Specifications here. Fittings or Terminals required for your Cable Assemblies Additional information or Specific Product Requirements If you are not sure of any of the above criteria and would like assistance in determining the requirements for your application, please call our Customer Service Department at: (888) 434-8077 or contact form. This message is intended with discretion for the exclusive use of Motion Control Technologies Inc.. This is not an encrypted method of communication, do not include private, privileged or confidential information. Name This field is for validation purposes and should be left unchanged.