16 Series Ball Fittings

Product Image and Schematic

This slideshow requires JavaScript.


MCT 16 Series Ball Fittings offer a solution for your cable assembly, cable lanyard, medical assemblies and push pull controls requiring a spherical radius bearing point. Ball fittings can also be used in conjunction with 41 Series turnbuckles. This combination is preferred when a cable assembly requires a rotating assembly. Because of its size, ball fittings are ideal for assemblies in tight areas and fittings that require assembly in slots or grooves.
PART NUMBER (D) BALL DIA. CABLE DIA. L Ref. In.
16-014-093S 0.093 0.014 0.085
16-014-125S 0.125 0.014 0.115
16-018-063S 0.063 0.018 0.065
16-018-093S 0.093 0.018 0.085
16-018-125S 0.125 0.018 0.115
16-018-156S 0.156 0.018 0.115
16-024-093S 0.093 0.024 0.085
16-024-125S 0.125 0.024 0.115
16-024-156S 0.156 0.024 0.150
16-027-093S 0.093 0.027 0.085
16-027-125S 0.125 0.027 0.115
16-027-156S 0.156 0.027 0.150
16-032-093S 0.093 0.032 0.085
16-032-125S 01.25 0.032 0.115
16-032-156S 0.156 0.032 0.150
16-032-188S 0.188 0.032 0.170
16-032-250S 0.250 0.032 0.235
16-038-125S 0.125 0.038 0.115
16-038-156S 0.156 0.038 0.150
16-038-250S 0.250 0.038 0.235
16-044-125S 0.125 0.044 0.115
16-044-156S 0.156 0.044 0.150
16-044-250S 0.250 0.044 0.235
16-047-093S 0.093 0.047 0.085
16-047-125S 0.125 0.047 0.115
16-047-188S 0.188 0.047 0.170
16-047-250S 0.250 0.047 0.235
16-063-188S 0.188 0.063 0.170
16-063-250S 0.250 0.063 0.235
16-063-313S 0.313 0.063 0.285
16-093-188S 0.188 0.093 0.170
16-093-250S 0.250 0.093 0.235
16-093-313S 0.313 0.093 0.285
16-125-250S 0.250 0.125 0.235
16-125-313S 0.313 0.125 0.285

Protrusion:

.040″ max. to .047″ dia. .062″ max. from .062″-.078″ dia. .125″ max. from .093″-.312″ dia. Cable can be ground flush.

Note:

All shown dimensions are after swaging. All ball fittings in stock are made from 300 series stainless steel. Ball Fittings can also be machined from Brass.

Have A Question?

  • This field is for validation purposes and should be left unchanged.