mct logo                                                                                                                                   MCT Cable Thomas link MCT Twitter link

 

 

Cable Assemblies, Cable Lanyards, Push Pull Controls:

Cable Construction:

All wire rope cables / wire rope cable assemblies and cable lanyards are manufactured from single wires that are twisted into main strands.    The most standard constructions of wire rope are 1x7, 1x19, 7x7, and 7x19 which represents (# of strands by # of wires in each strand). The most common strand is the 1x7 construction which includes one straight center strand with six wires wrapped around it. This basic 1x7 construction is the basis for 1x19, 7x7, and 7x19 cables. The 1x7 construction is the stiffest, while the 7x19 is one of the most flexible. SA Miniature Stainless Steel cables range from .009 to .045 inch. Our commercial Quality galvanized and stainless steel cables range from .032 to 1/4 inch diameter.

                               

                                      Wire Rope Cable/ Wire Rope Assemblies Construction Table 

Straight Tensile Load 
Tensile Load With Flexing 
Over Pulley 
Recommended Construction 
1x19 
7x19 
7x19 Coated and Lubricated 
Minimum Construction 
1x7 
7x7 
7x7 

           cable

                                    

(TF) 888-434-8077

Site Search

  MCT Flyer 2009.pdf

 CONTACT US:  
 
 Motion Control Technologies, Inc.    
 158 West Clinton Street     
 Unit FF  
 Dover, NJ 07801 USA       
       
 (Tel) 888-434-8077  
 (Tel) 973-361-2226   
 (Fax) 973-361-3103   
 info@mctcable.com          
 
   Site Map